25 ton hydraulic press & straightening hydraulic press& air conditioner hydraulic press
Features of C Frame Hydraulic Press
1. Y41 Series C-Type Hydraulic Press is one of the new generation of plate process and developed by Besco machine Tool Limited..
C-frame design for large operating spaces - suitable for automatic operations forming, punching, bending,straightening and multi-press assemblies to form automatic production line.
2. Totally European design,Monoblock,Welded steel frame rigid to deflection moment and high tensile with ST44 A1 material.
3. Fully enclosed drive, easily accessible for maintenance, eliminates, exposed over hanging parts,slide and bolster tables with T-slots.
4. Uses a variable flow piston pump - offers high pressure resistance, high velocity, durability and low noise.
5. Hydraulic pipe system uses integrated circuits - manifold block fits inside the press to reduce piping and oil leaks, easy to maintain, simple and safe. Hydraulic system is from Bo sch,Germany.
6. Protective fence and the safety interlock to ensure the operation safety. Have a movable single-hand pedal switch,easy to operate.
7. Front Side Covers with safety switches, Back light safety guards, Foot pedal conforming to CE regulation.
8. Guiding device: adopts four cylindrical location guiding to make sure of the steady precision, and it's easy to test and maintain.
9.Presses operated with automatic one cycle design; two hand push button design for simple and safe operation. Presses which could realize three-operation mode: adjustment, manual and semi-automatic.
10. PLC press control is flexible and safe. Adjustable proximity switches allows stroke adjustments in seconds.
11. All our electrical, hydraulic and mechanical parts are standard in the industry and available throughout North America and Europe.
12. The Machine is with both hands button and foot switch control: anti-tie down, non-repeat controls with ring guards; conforms to OSHA.
13. Dual control you can select to use:
a) Moveable pedestal height for comfort and ease of operation c/w dual electric palm buttons & extra emergency stop.
b) Movable single-hand pedal switch .
14. Optional touch screen terminals offer.
a) Data storage of mould(s) and manufacturing conditions.
b) Reduced mould replacement time and calibration, fabrication requirements.
c) Programmable memory for working conditions, displays pressure, stroke, spend data, etc; one cycle process sequence.
Work Environment
Power Requirement: Three phase four wire, 380V, 50HZ ( as design accepted)
Installation Field: Clean, low dust
Maximum Temperature :40ºC
Minimum Temperature: -5ºC
Relative Temperature:55-85%
Height: less than 1000M
Y41 |
Unit |
Y41-40T |
Y41-60T |
Y41-80T |
Y41-100T |
Y41-160T |
| Nominal Pressure |
KN |
400 |
600 |
800 |
1000 |
1600 |
| Max.Pressure |
Map |
22.2 |
24.3 |
25.8 |
25.8 |
25.8 |
| Max.Opening Height |
mm |
600 |
630 |
720 |
800 |
800 |
| Slide Stroke |
mm |
400 |
500 |
500 |
500 |
500 |
| Accuracy Error Range Between Tables |
mm |
|
|
| Throat depth |
mm |
320 |
350 |
350 |
350 |
350 |
| Dimensions of Die Table |
F.B. |
mm |
550 |
620 |
650 |
650 |
680 |
| L.R. |
mm |
700 |
700 |
700 |
800 |
850 |
| Ram Table Dimensions |
F.B. |
mm |
380 |
450 |
450 |
480 |
500 |
| L.R. |
mm |
500 |
500 |
550 |
600 |
600 |
| Worktable Height |
mm |
710 |
720 |
730 |
730 |
830 |
| Work Table Opening Diameter |
mm |
100 |
140 |
150 |
150 |
150 |
| Hydraulic cylinder diameter |
mm |
150 |
180 |
200 |
250 |
280 |
| Motor Power |
Kw |
5.5 |
7.5 |
7.5 |
7.5 |
7.5 |
){kind=link}