Hydraulic Press Machine for Manhole Cover
Product Description
The machine use rod tightening combination frame structure, with sufficient strength and rigidity;
The slider uses rail guide; machine and slider are welded steel, the material is Q235-A, using carbon dioxide gas shielded arc welding, the weld should be ground smooth, no weld slag and
streaming scars, remove inner stress after weld. Columns guideway using high-quality materials, the guide portion after quenching hardness of HRC50 or more, good wear resistance.
Tope beam, worktable, left and right columns, sliders use Q235-A welded, remove inner stress after weld.
Oil Cylinder
Solo cylinder structure which is disposed on the upper beam hole, cylinder block uses 45 # forged steel,
material uniformity. Plunger rod surface hardening hardness is HRC45-50. The cylinder finishing by high-precision machine tools, cylinder bore after refining process to increase surface hardness and wear resistance
Hydraulic System
(1)Hydraulic system adopts advanced cartridge valve integrated system, the valve big flow, anti-pollution, flexible control, reliable performance, easy maintenance. Pilot solenoid valves are made of high
quality products.
(2)Hydraulic system working pressure is 25MPa, the main valve should be two-way cartridge valves. Hydraulic system is with overload protection devices. Hydraulic piping system
design reasonable, piping arranged in an orderly and tidy, high and low pressure pipeline is obvious
color distinction.
Hydraulic piping system should be reliable sealing flange connection priority connections, piping
layout and tidy, and the use
of shock and vibration-resistant gauge pipe clamps, pipe phosphate processing, and then coated
with rust-resistant paint.
(3)How to work Fixed stroke and fixed pressure; hydraulic machine operation: adjust, single cycle,
jog on the mold and work with automatic feeding.
(4)Fuel tank is divided into two parts, oil zone and oil back zone. Tank is steel plate welded structure,
which is installed with the oil level gauge, air filter, etc., tank was after pickling, passivation and anti-rust treatment, with separate oil filtration devices, and enables filtering device blockage accident alarm.
Tank with oil level indication and oil level gauge (upper and lower) alarm device.
(5)Filling valve Description: filling valve is to provide the master cylinder to draw or drain oil.
Safety Protection System
(1)stationary and emergency stop button: When an exception occurs press the "stationary" button
presses all the work stopped; press "stop" buttons, including motors are stopped.
(2)wo-hand operation button: hands downlink synchronization time 0.5 ~ 1S.
(3)the hydraulic circuit supporting Insurance: To prevent uncontrolled downward slide in the master
cylinder piston hydraulic bearing inferior vena setting interlock circuit, to ensure safety.
(4)overload protection: hydraulic system with hydraulic safety valve to ensure the press not overloaded work.
Specification |
Nominal
Pressure |
Ejector
Pressure |
Maximum
Hydraulic
Work Force |
Maximum
Slide of
Stroke |
Maximum
Stroke of
Ejector
Piston |
Maximum
Distance
Between
Slide and
Worktable |
Dimension
of
Machine
(L-R) |
Dimension
of
Machine
(B-A) |
Motor
Power |
Y32-63 |
630 |
190 |
25 |
500 |
150 |
800 |
2000 |
1500 |
7.5 |
Y32-100 |
1000 |
190 |
25 |
600 |
200 |
900 |
2160 |
1504 |
7.5 |
Y32-200 |
2000 |
350 |
25 |
700 |
250 |
1100 |
2825 |
2060 |
15 |
Y32-315 |
3150 |
630 |
25 |
800 |
250 |
1250 |
3200 |
2100 |
22 |
Y32-500 |
5000 |
1000 |
25 |
900 |
350 |
1500 |
4060 |
3525 |
30 |
Detailed Photos
We are currently reviewing our product packaging from the angles of waste-reduction and resource-saving. We are also working on improving transportation efficiency from the design phase of product development.
1.Our wooden case is after fumigation treatment. Needn't timber inspection, saving shipping time.
2.All the spare parts of the machine were covered by the some soft materials mainly using pearl wool.
3.The outmost is wooden case with fixed formwork.
4.The bottom of the wooden case has firm iron jack, convenient to handing and transport.
1.We provide 24 hours on-line service
Can contact us by MSN, Skype, Email and Telephone at any timeOur factory also will make DVD to show the operation steps for the
customer.
2.We can send the component by DHL, TNT freely
Our guarantee time is two years, if any component is damaged during guarantee time
3.Our factory can send our engineer to the customer's factory install, commission and training freely
The customer provide the double trip tickets, food and accommodation for our engineer. The customer also can send the engineer to
our factory to learn the operation and maintains freely.
FAQ
1.Can you supply the relevant documentation?
Yes, we can provide most documentation including Certificates of Analysis /Conformance; Insurance; Origin, and other export documents where required.
2.What kinds of payment methods do you accept?
You can make the payment to our bank account, Western Union or PayPal:30% deposit in advance, 70% balance before delivery
3.Guaranty covers?
Main parts of the machine , wearing parts not included .PARTS DELIVERY. Within 5 days by DHL / Fexed .
4.About our after-sale service:
Customer service 24 hours online, you can send technicians to your country to repair the machine. Buyer shall bear all costs including visa, round trip airfare and suitable accommodation and buyer shall pay usd 100 / day salary.
5.How to replace machine parts?
Parts adopt international brands, good quality, no need to replace within 3-5 years, convenient to buy suitable parts locally.
6.Installation&Commissioning:
Usually solved by video conference, if necessary, can be dispatched to the door installation debugging and maintenance of technical personnel.