Besco Press Teeth Harvester Blade Making Machine

Product Description

Product Description

Main Features

21/J23 power press is widely used in stamping and forming of electronic, communication, computer, household appliances, furniture, transportation, (automobile, motorcycle, bicycle) hardware parts, etc.

*J23 series Open Eccentric Presses is a general-purpose presses, suitable for forming, blanking, punching, bending and other cold stamping process.* C-frame Casting fuselage,maximum rigidity and minimum deflection for accurate parts and long tool life. body can be tilted, , high rigidity and less deformation Compact. Thick plates and large columns provide you with the stable platform you need for your demanding application. *. The Machine use Rigid rotated bond clutch rigid and well supported. The clutch gives continuous strokes for mass production. * Crank shaft is made of special alloy steel machined to close accuracy and fitted in bronze bushes for smooth working, longer life & accuracy. * Properly sized flywheel, is made of high grade cast iron, for storing and releasing adequate energy for the pressing   operations, and properly balanced for smooth running. * Gear are of steel cast or fabricated. Gear teeth are generated by precision hobbing machine. * Machine is with both hands button and foot switch control: anti-tie down, non-repeat controls with ring guards; conforms to OSHA. * Protective fence and the safety interlock to ensure the operation safety. Have a movable single-hand pedal switch,easy to operate.

Parameters		Unit	J21/J23-6.3	J21/J23-10	J21/J23-16	J21/J23-25	J21/J23-40	J21/J23-63
Nominal pressure on sliding block		KN	63	100	160	250	400	630
Nominal pressure stroke Sp		mm	2	2	2	2.5	6	6
Slide stroke		mm	35	45	55	65	90	110
Stroke frequency	Fast speed	times/	170	145	120
	Low speed	min				55	45	50
Die height		mm	150	180	220	270	320	360
Die Height Adjustment		mm	30	35	45	55	65	80
Distance between slider center and machine		mm	110	130	160	200	250	260
Vertical columns distance		mm	150	180	220	270	340	350
Slider bottom size	L×R	mm	140	170	200	250	300	300
	F×B	mm	120	150	180	220	220	260
Size of handle hole	Diameter	mm	30	30	40	40	50	50
	Depth	mm	55	55	60	60	70	70
Die Height Adjustment		mm	30	35	45	55	65	80
Distance between slider center and machine		mm	110	130	160	200	250	260
Vertical columns distance		mm	150	180	220	270	340	350
Slider bottom size	L×R	mm	140	170	200	250	300	300
	F×B	mm	120	150	180	220	220	260
Size of worktable	L×R	mm	310	370	450	560	700	760
	F×B	mm	200	240	300	370	460	480
Power of electric motor	KW	0.75	1.1	1.5	2.2	4	5.5	7.5
Weight(Approximate)	KG	420	595	1095	1830	2650	4200	5580

 

 

 

 

  

 

Company Introduction

 

Why choose us?

BESCO started Production of CNC equipment began in 1997,and matched production linefrom 2002. And all the times our company put the machine quality at the first position, focus on the machine development and update, which keep our company have a fast development speed and get good reputation from customers. Our long-term cooperation company include:

Foxconn, NK car, China Aluminum Group, Fangyuan Group, Tianrun Crankshaft, Konka, etc. Our company make "satisfy the

customers" as our target, hope to create the best future with old and new customers.

1.We provide 24 hours on-line service    

Can contact us by MSN, Skype, Email and Telephone at any timeOur factory also will make DVD to show the operation steps for the
customer.
2.We can send the component by DHL, TNT freely

Our guarantee time is two years, if any component is damaged during guarantee time
3.Our factory can send our engineer to the customer's factory install, commission and training freely

The customer provide the double trip tickets, food and accommodation for our engineer. The customer also can send the engineer to
our factory to learn the operation and maintains freely.

Transport And Pack

 

We are currently reviewing our product packaging from the angles of waste-reduction and resource-saving. We are also working on improving transportation efficiency from the design phase of product development.
1.Our wooden case is after fumigation treatment. Needn't timber inspection, saving shipping time.
2.All the spare parts of the machine were covered by the some soft materials mainly using pearl wool.
3.The outmost is wooden case with fixed formwork.
4.The bottom of the wooden case has firm iron jack, convenient to handing and transport.

FAQ

1.Can you supply the relevant documentation?  
Yes, we can provide most documentation including Certificates of Analysis /Conformance;     Insurance;     Origin, and other export documents where required. 
2.What kinds of payment methods do you accept? 
You can make the payment to our bank account, Western Union or PayPal:30% deposit in advance, 70% balance before delivery  
3.Guaranty covers? 
Main parts of the machine , wearing parts not included .PARTS DELIVERY.    Within 5 days by DHL / Fexed . 
4.About our after-sale service:
Customer service 24 hours online, you can send technicians to your country to repair the machine.      Buyer shall bear all costs including visa, round trip airfare and suitable accommodation and buyer shall pay usd 100 / day salary. 
5.How to replace machine parts?
Parts adopt international brands, good quality, no need to replace within 3-5 years, convenient to buy suitable parts locally.
6.Installation&Commissioning:
Usually solved by video conference, if necessary, can be dispatched to the door installation debugging and maintenance of technical personnel.